Languages

Solution for DL7006-KB Setup Wizard stopped Error

 


1. Issue Description

Model DL7006-KB, when turn on the tablet for the first time there will be ¡°Initial Setting¡±, if connect the WiFi and log in Google account in the ¡°Initial Setting¡±, it will pop out ¡°Setup Wizard has stopped¡± all the time, and can¡¯t enter into system.

 

ͼƬ1.png

 

2.  Solution

1) Turn off the tablet. Press and hold the ¡°Power button¡± &¡± VOL+ button¡± at the same time, until the tablet enter ¡°Select Boot Mode¡±, showed as below picture:

 

ͼƬ2.png

 

2) Press ¡°VOL+ button¡± to move to ¡°Recovery Mode¡±, press ¡°VOL- button¡± to confirm, tablet will enter Recovery mode, showed as below picture:

 

ͼƬ3.png

 

3) Press ¡°Power button¡± &¡± VOL+ button¡± at the same time for three times, then press ¡°Power button¡± &¡± VOL- button¡± at the same time for three times, repeat these two pressing circularly until it turn into ¡°Recovery Mode¡±, showed as below picture:

 

ͼƬ4.png

4) Press ¡°VOL+ button ¡°or ¡°VOL- button¡± to move to ¡°Wipe data/factory reset¡±, then press ¡°Power button¡± to confirm, it will enter ¡°Recovery mode¡±, showed as below picture:

 

ͼƬ5.png

 

5) Press ¡°VOL+ button ¡°or ¡°VOL- button¡± to move to ¡°Yes¡ªdelete all user data¡±, then press Power button to delete all user data 

 

6) It will turn into Recovery Mode showed as below picture, press ¡°VOL+ button ¡°or ¡°VOL- button¡± to move to ¡°Reboot system now¡±, then press Power button to recovery. Your tablet will reboot. 

 

ͼƬ7.png


7) After reboot, the tablet will enter ¡°Initial Setting¡± again, for the ¡°Get connected¡± page, DO NOT connect WiFi , choose ¡°Don¡¯t use any network for setup¡±, showed as below picture. Then the tablet can be open successfully. You can connect the WiFi after finished the ¡°Initial Setting¡±.

 

ͼƬ6.png

Copyright 2013-2018 @ all rights reserved